ISO 21498-2:2024 New Regulation Interpretation Part 1: What Changed in High-Voltage Component Electrical Tests and Who It Affects
Français
7days a week from 9:00 am to 9:0pm
+86 18001853095

Shanghai Leiditech上海雷卯电子科技有限公司是专业的静电保护元件厂家,TVS二极管供应商;专业提供防雷防静电方案,电磁兼容EMC免费测试等服务,品质保证,库存充足,型号齐全,值得信赖,如有采购静电保护元件,TVS二极管需求,请联系雷卯,24小时服务热线:021-50828806.

By LEIDITECH | 21 September 2026 | 0 commentaires

ISO 21498-2:2024 New Regulation Interpretation Part 1: What Changed in High-Voltage Component Electrical Tests and Who It Affects

 Preface

On November 22, 2024, ISO 21498-2:2024 "Electrically propelled road vehicles — Electrical specifications and tests for voltage class B systems and components — Part 2: Electrical tests for components" was officially released, simultaneously canceling and replacing the 2021 first edition . As the international standard for high-voltage component electrical testing in the global new energy vehicle industry, each revision directly affects the testing costs of component suppliers, laboratory equipment upgrades, and vehicle manufacturers' sourcing specifications (SOR) .

This article provides a systematic interpretation of the new standard: what has actually changed, how the changes propagate to the market through three layers of mechanisms, and what they mean for component suppliers, laboratories, OEMs, export compliance, and costs. Understanding this standard is essential to avoid detours in new project planning and certification strategy.

I.What is the standard: General framework for electrical tests of class B voltage components

1.1 Scope of application and system positioning

ISO 21498-2:2024 provides detailed specifications for component electrical testing of voltage class B (60V–1500V DC) systems in electric vehicles. It introduces a short circuit test requirement for the first time and revises key parameters such as artificial network (AN) impedance characteristics. Together with ISO 21498-1:2024 Voltage sub-classes and characteristics, it forms a complete technical system that regulates the design and testing requirements for high-voltage electrical systems in electrically propelled road vehicles.

1.2 Three-layer propagation mechanism

ISO standards themselves cannot compel any enterprise; their market influence is transmitted through three layers: the first layer is adoption by certification bodies such as CQC or SGS; the second layer is indirect reference through regulations like UN R100; and the third layer is inclusion in OEM SOR (sourcing specifications) or corporate standards. European OEM sourcing specifications, such as Volkswagen VW 80300/80303, BMW LV 123, and Mercedes-Benz GS 95023, typically state "complies with the latest version of ISO 21498-2." After the 2024 edition was published, the OEM cycle for updating SOR is generally 6–12 months, meaning that since the second half of 2025, new projects have been gradually transitioning to the 2024 edition.

II.Release timeline and market impact

2.1 Standard evolution timeline

Time

Milestone

Description

2022-01-18

New project proposal approval

ISO/TC 22/SC 37 initiates revision

2023-05-26

Committee draft (CD) registration

Enters the public comment stage

2024-01-10

DIS voting start

Global voting on the Draft International Standard (DIS)

2024-06-21

DIS voting passed

Enters the Final Draft International Standard (FDIS) stage

2024-11-22

Official publication

Second edition, with the 2021 edition simultaneously withdrawn

2025-10-31

Enter To be revised

Next revision initiated, third edition currently under development

2.2 Impact on five types of market participants

Component Suppliers: Testing costs and R&D cycles both increase.

Laboratories and Equipment Manufacturers: The replacement wave has already begun——AN suppliers are promoting products that "meet the new ISO 21498-2:2024 requirements" (impedance DAkkS calibrated, liquid-cooled constant-resistance, supporting 150 kHz bandwidth). Domestic equipment manufacturers have already built the 2024 version test library into firmware. 2025–2026 is the replacement window for high-voltage electrical performance laboratory equipment.

OEMs: New projects default to the 2024 version; older projects transition gradually (existing production models can continue using the 2021 version reports within the validity period of their certificates, provided customers have not mandated a switch to the new version).

Export Compliance: European > North America > Domestic (European SOR updates are the fastest; North America mostly continues to use LV 123 and corporate standards; domestic depends on when CQC issues its notice).

Cost Transmission: Short-term increase, long-term decrease——in the short term, the new short-circuit test, equipment replacement, and re-issuance of reports will increase single-component certification costs by an estimated 15%–30% (primarily due to equipment amortization). In the long term, the standard's goal is to unify voltage subclasses and reduce specification fragmentation; over a 3–5 year horizon, economies of scale will dilute the initial costs.

 

Shanghai Leiditech (LEIDITECH) has simultaneously updated its high-voltage protection component library to help customers smoothly transition to the 2024 version.

III.List of major changes

#

Change Item

2021 version

2024 version

Impact

1

Added Short circuit test

No such clause

Added Clause 6.12 (Purpose/Setup/Procedure/Requirements)

High

2

Annex B Tests at different temperatures

Normative / informative appendix

Entire section deleted

Medium

3

Table B.2/B.3 Additional values

Fewer original table values

Additional values added to both tables

Low

4

Table B.4 Example current limits

Not included

Added example current limit values

Low

5

Annex C Artificial network

Includes high/low temperature battery impedance

Unified to 50 mΩ, AN capacitance made optional

Medium

6

Ripple time-domain to frequency-domain method

Main body description

Moved to informative Annex D

Low

7

Ripple emission maximum level

Original upper limit <5V

Added 5V maximum level

Medium

8

Ripple immunity minimum level

Original lower limit >6V

Added 6V minimum level

Medium

9

Ripple immunity current limit

Not explicitly stated / relatively coarse

Clarified ripple current monitoring requirements

Medium

10

Annex C Artificial network capacitance

Mandatory configuration

Became optional

Medium

11

Generated ripple test method

Oscilloscope time-domain + FFT

Added EMI receiver test method

Medium

IV.Laboratory implementation precautions

For testing laboratories, the following points should be noted for the actual implementation of the 2024 version:

· Ripple emission levels: The original upper limit was below 5V; the 2024 version requires testing at the 5V level as well.

· Ripple immunity range: The original lower limit was above 6V; the immunity scan starting point must be extended down to 6V.

· Ripple current monitoring: New current limit values have been added. MCU/DC-DC devices are prone to exceed ripple current limits under high-current conditions, requiring additional monitoring.

· Annex C capacitance: Has become optional. Capacitors soldered into old setups may be removed, but the change must be noted in the test report.

· Test equipment: Oscilloscope-only setups are no longer sufficient. Laboratories with only oscilloscopes will need to add an EMI receiver for emission scanning.

Summary

ISO 21498-2:2024 itself does not address electrical safety or EMC; rather, together with safety regulations and EMC, it forms a three-dimensional collaborative verification system for high-voltage components. In the short term, the electrical testing environment for high-voltage components, functional design of high-voltage circuits, and associated EMC/safety solutions all need to be upgraded, requiring significant concentrated investment. In the long term, the benefits of economies of scale, improved R&D efficiency, and decoupling design from energy are substantial. It is recommended that component design and manufacturing companies plan their high-voltage electrical, EMC, and safety solution upgrades based on the new standard as early as possible. Leiditech provides high-voltage TVS, ESD, and high-power surge protection components and solutions compliant with ISO 21498-2:2024. Please contact us for selection recommendations.

Shanghai Leiditech (LEIDITECH) provides high-voltage TVS, ESD, and high-power surge protection components and solutions compliant with ISO 21498-2:2024. Please contact us for selection recommendations.

#ISO21498-2 #ISO21498 #ElectricVehicles #HighVoltageComponents #ElectricalTesting #NewEnergyVehicles #Leiditech #ShanghaiLeiditech #LEIDITECH #EMCStandards

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués. *
Nom
Email
Contenu
Code de vérification
ver_code